Address Ostim Mah. 1234 (eski57) Sok.
No:93 Yenimahalle/Ankara
Phone +90 532 151 06 93

Construction Machinery Pallet Production

Construction equipment pallet production may vary according to the construction equipment used. There are two options for materials, metal and rubber. Metal pallet production is the most used type. It is mostly made of steel. Besides being the most ideal option for hard floors, it provides an efficient and long-lasting working system in heavy tonnage machines. Secondly, there is also the production of rubber pallets. They are systems that do not use much newer than metal types. It is mostly preferred to reduce weight in small construction machines. They have uses that eliminate the disadvantages of metal pallets such as damaging the floor.

Construction equipment pallet production includes different types according to pallet width. These can be examined in three parts as narrow, standard and wide pallets. Narrow pallets are ideal for hard floors and are 50 cm wide. Secondly, the construction equipment is the models used in standard pallet production unless any type is specified. Standard models, which are very suitable for normal floors, are 60 cm wide. On looser soils, wide pallets are preferred. It is 80 cm wide. Dry and oily construction equipment pallets are produced according to the lubrication status of the pin and bushing joints. Dry pallets are models that work without pin-bushing oil. There are steel seals at both ends that prevent abrasive particles from entering between the two elements. Oily pallets are models with a hole in the middle of the pin. It acts as a volume oil reservoir.

While the construction machine pallets are produced, options are offered according to their shapes. Parallel track models have a classic type of undercarriage. The track has a parallel appearance between the idler and the sprocket. This type is often used. In addition, there is also the production of triangular construction equipment pallets. In these, the sprockets are above. Machines have two directional wheels, one at the front and one at the rear. The connections of the walking rollers are different from the parallel machines. In triangular machines, it is important that the sprocket is up. In this way, the vehicle is both protected from impacts and the life of the vehicle is extended. Also, when producing triangular tracks, the position of the sprocket determines the removal of the final drives. This significantly reduces the time required to install final drives.

You May Also Like
The Worlds Largest Construction Equipment

The Worlds Largest Construction Equipment

The world's largest construction equipment can be counted among the largest construction equipment ever produced. Apart from the advantages they provide in the areas of use with their working mechanisms, functions and designs, they also have many fan

Construction Machinery Pallet Production

Construction Machinery Pallet Production

Construction equipment pallet production may vary according to the construction equipment used. There are two options for materials, metal and rubber. Metal pallet production is the most used type. It is mostly made of steel. Besides being the most i

Tracked Walking System

Tracked Walking System

Tracked walking systems are machines that carry themselves on their way. These systems are preferred instead of machines with rubber wheels, which are insufficient in operations such as pushing, ripping, dismantling and excavation.

Interested in working with Oflaz Palet?

Oflaz Palet has provided the best service to its customers by continuously expanding its business volume since its establishment.